You are viewing a used Hobart Stero 2 Door-Type Dishwasher with Built-In Booster Heater SD3 . Overall measurements are 28.75″ W x 34″ D x 66.5″ H. This requires: 208–240V electrical service (depending on configuration), hot and cold water connections, drain connection, built-in booster heater, appropriate dishwashing chemicals, and adequate installation space for the Stero SD3. This SD3 model sells new for over $12,000. We also sell other new models and have financing options. Our Clearance Warehouse is located in the Foothills Industrial Park #5, 6613 – 44th Street SE, Calgary, AB. Open Monday to Friday 9am to 5pm.
Please note that:
| Capacity | 58 racks per hour |
|---|---|
| Wash Cycle Options | 1, 2, or 4 minutes (60–240 sec) |
| Water Usage | 0.85 gal/rack (3.2 L) |
| Booster Heater | 8.5 kW built-in electric booster |
| Tank Heat | 5 kW |
| Final Rinse Temperature | 180°F (82°C) |
| Incoming Water Requirement | 110°F minimum with booster |
| Wash Motor | 2 HP |
| Width | 28.75″ |
| Depth | 34″ |
| Height (Closed) | 66.5″ |
| Height (Open) | 75.75″ |
| Door Opening | 16.9″–17″ |
| Voltage | 208–240V |
| Phase | 3 Phase |
| Frequency | 60 Hz |
| Amperage | 24.9 A standard / 45.4 A single-point connection |
| Water Connection | 3/4″ inlet |
| Flow Pressure | 20 ± 5 PSI |
| Shipping Weight | Approximately 302 lb (137 kg) |
No product videos available.
No documents available.
